HOME> Product Information> Traffic Management / Facilities> Traffic> Emergency Cutter for Wire Rope Type Guard Fence
Traffic management/facility equipment

Wire rope type fence fence emergency cutter

East Japan Expressway Co., Ltd.
Product Summary

Joint development: Izumi Products Co., Ltd.

A manual hydraulic cutter for cutting wire rope type guard fences that can safely, quickly and reliably cut wire rope in the event of an emergency such as a traffic accident.
* Cutting a wire rope with a general manual hydraulic cutter involves risks such as injury and damage to the cutter blade.
Features/Specifications
  1. Manual hydraulic system that does not require external power supply or battery as emergency equipment
  2. Equipped with a special cutter blade developed exclusively for cutting road wire ropes
  3. Remote operation is possible to prevent accidental contact with the cut wire
  4. Compact design for vehicle installation
  5. Simple structure with reduced risk of failure
  1. Cutting target: Wire rope type protective fence (LD type)
  2. Hydraulic output: 76kN
  3. Total length: Cutter 245mm, Pump 330mm
  4. Weight: 3.0 kg of cutter, 3.0 kg of pump
  5. Hydraulic hose: 2.0m

It was developed by reflecting the opinions of various people such as traffic control personnel, traffic police officers, rescue personnel who are present at the traffic accident scene.

Achievements (sales/construction/introduction)

当　　　社：
公共団体等：
民間会社等：

44基
2基
5基

top of the page