[E16] Yokohama Yokosuka Road Up and Down Line Yokosuka IC Exit Lamp Night Closure Notice

February 15 (Monday) from 23:00 to 4:00 the next morning
-We will replace the sign board-

  • Corporate Top
  • Press Room
  • Press Release Kanto Regional Head Office
  • [E16] Yokohama Yokosuka Road Up and Down Line Yokosuka IC Exit Lamp Night Closure Notice

The latest regulatory information isDraTraPlease see.

February 1, 3rd year of Reiwa
East Nippon Expressway Co., Ltd.
Keihin Management Office

NEXCO EAST Keihin Management Office (Yokohama City, Kanagawa Prefecture) will be closed at night to replace the sign board at the exit ramp of the E16 Yokohama Yokosuka Road Will be carried out.
We apologize for the inconvenience caused to our customers, but we ask for your understanding and cooperation so that you will have time to spare when you go out.

1. 1. Closing location and date and time

(1) Closed location: Yokosuka IC exit ramp

Yokosuka Road Up and Down Line Yokosuka IC Exit Lamp Image of closed area
  • Attached to each line E16 The indication such as shows the route number (numbering) of Expressway.

(2) Date and time

Implementation date: February 15, 3rd year of Reiwa (Monday)
From 23:00 to 4:00 the next morning
Preliminary day: February 16th (Tuesday) to 18th (Thursday), 3rd year of Reiwa
From 23:00 to 4:00 the next morning each day
Image of date and time
Two-dimensional code image link to NEXCO EAST (Kanto construction regulations) twitter (external link)
  • In stormy weather, it will be postponed to the spare day.
  • We will inform you of the implementation decision on Twitter etc. around 17:00 on the day.

2. Detour

Please refer to the figure below for the detour.
If you detour between Yokosuka Road Zushi IC and Yokosuka IC as shown in the figure below, it will take about 28 minutes (usually about 3 minutes).
If you detour between Kinugasa IC and Yokosuka IC on Yokosuka Road as shown in the figure below, it will take about 10 minutes (usually about 5 minutes).
The detour will take longer, so please leave plenty of time.

Image of detour

3. Construction overview

Yokosuka Road Up and Down Line At the exit ramp of Yokosuka IC, we will carry out sign board replacement work to repair the aged sign. The section where this work is to be carried out is one lane, and it is not possible to carry out the work under normal lane regulations, so it is necessary to close the lamp and carry out the work.
Therefore, in order to avoid inconvenience to customers as much as possible, we will close the lamps on weekday nights when traffic is light and carry out construction intensively and efficiently. This work is necessary for you to use the Expressway safely and comfortably, so we ask for your understanding and cooperation.

Sign board replacement construction work status photo

Four. How to obtain traffic information

(1) Guidance by distribution / posting

  • Notice signs, posters and leaflets will be posted at toll booths and rest facilities nearby.
  • A banner will be posted on the overpass on the Expressway.

(2) Road traffic information that can be obtained before going out

(3) Road traffic information available while using the Expressway

  • Road information board
  • Highway radio (AM1620kHz)
    The highway radio section is indicated by signs on the Expressway.
  • Highway Information Terminal
    We will inform you of road information in an easy-to-understand manner by the monitor screens installed in SA / PA.
  • VICS
    You can get road traffic information with VICS-compatible car navigation and other on-board devices.
  • Information is also distributed on the official Twitter account.
    " NEXCO EAST (Kanto)" (@e_nexco_kanto) Real-time traffic information
    " NEXCO EAST (Kanto construction regulations)" (@e_nexco_kanto_k) Judgment regarding implementation of construction regulations
Image link (external link) to download page of Adobe Acrobat Reader

To view the PDF file, you need the Adobe Systems plug-in software "Acrobat Reader (Japanese version)". If you do not have​​​ Download from here (free)Please use it.